|
|
|
CD Start Page | DATA ACQUISITION ONLINE Page | DATA ACQUISITION PRODUCTS Page |
Users may select the particular IO address space at which the DSP-100 is to be located. The two serial ports of the DSP-100 may be configured at either the standard COM port IO address locations or in a 16-byte continuous IO address block. Also, the DSP-100 may be configured at any one interrupt level. An interrupt status register is provided for determining the serial port which was the source of the generated interrupt.
Since the two serial ports must share one hardware interrupt level, and enhanced serial device driver is provided for Windows 3.1. The driver will allow two serial ports to share one hardware interrupt level. A configuration file is also provided for operation under Windows 95. In addition, a PCMCIA Card Services Version 2.1 compliant client driver for DOS is provided which will provide for automatic configuration of the DSP-100 upon each card insertion. This will permit the DSP-100 to be "hot-swapped". The DSP-100 will be automatically configured upon each card insertion. A separate enabler program is provided for the configuration of the DSP-100 for those who wish to run the card without card and socket services installed.
COPY [To Your Hard Drive] DSP-100 Configuration Software (requires PCMCIA Card)
VIEW an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).
VIEW the DSP-100 operator's manual now! (requires Acrobat Reader).
|
| |||||
